Care and
Maintenance
Care and Maintenance in Treadmill Running Belts
Care and Maintenance
Before any maintenance, always ensure the treadmill power is off and unplugged form the electrical outlet. Make sure all bolts and nuts are tightened before use. Do not modify the equipment. If it has any defective components, please contact the retailer or service agent and keep the equipment out of use until it is repaired. Use a warm, damp cloth to keep the product clean. Do not splash water or fluid on or near the equipment. No wet cleaning of electrical components.
Running belt moving to one side
After prolong use of running, the belt may stretch out and become loose. If the running belt is shifting to the left, turn on the Master Power Switch and let the running belt run at a speed of 2-3km/h. Using the hex key, turn the left rear roller adjustment bolt 1/8 to 1/4 turn in a clockwise direction.
Running belt is slipping
If the running belt is slipping during use, turn off and unplug the treadmill. Using the hex key, turn both the left and right rear roller adjustment bolts 1/4 turn in a clockwise direction for the same
distance.
Ensure inspection of the product is done regularly – at least once a week is recommended. The safety level of this equipment can be maintained only if it is regularly examined for damage and wear. This includes any nuts, bolts, moving parts, bushes, chains, wheels, bearing & connection points etc. Take care with components that are susceptible to damage. (Computer, safety key, running belt and covers.) Defective parts should be replaced and the
equipment should not be used until repaired by an authorised service agent or similarly qualified person. Treadmill deck should be lubricated with silicone spray every 20-30 hours of use or at least every month to maintain peak operation.
The belt should start to correct itself by moving back toward the centre. Repeat the above procedure until the running belt is centred. If the running belt is shifting to the right, turn on the Master Power Switch and let the running belt run at a speed of 2-3km/h. Using the hex key, turn the right rear roller adjustment bolt 1/8 to 1/4 turn in the clockwise direction. The belt should start to correct itself by moving back toward the centre. Repeat the above procedure until the running belt is centred.
Turn on the Master Power Switch and let the running belt run at a speed of 2-3km/h. Now walk on the running belt to determine if it is still slipping. Repeat the above procedure until the running belt is not slipping.
Treadmill Maintenance Guides
General guide on how to change a running belt
How to apply Silicone Oil to a running machine
How to measure a treadmill running belt
How to measure a Fan drive motor Belt
So what are you waiting for?
Give us a call on 0407 494 940.
Get yourself a new Treadmill Belt, find out why we are Australia’s largest supplier of high quality Treadmill belts.
TREADMILL PARTS SELECTOR
CLICK HERE FOR FAN / MOTOR / DRIVE BELTS
CLICK HERE FOR CUSTOM SIZE TREADMILL BELT
FOR MAIN TREADMILL BELT IF YOU KNOW THE MANUFACTURER / MODEL SELECT BELOW
Select your machine:
To find your belt, Select Manufacturer, Select Model, Press Submit. *Please allow up to 10 seconds for large part lists to load (if your still having trouble please refresh the page)
OR SEARCH FOR YOUR MODEL BELOW
If you cant find your brand or model no problem
We have belt joining machines for made to measure belts. Any odd sized belt not in stock will be made promptly.If your model is not listed you can either cut the belt off and measure total length and width (most accurate) or if the belt is still on the machine, please follow this guide on how to measure your belt.
When you have the correct size pick your belt width below and follow the steps on the product page:
Call Us 0407494940 anytime happy to help with your treadmill needs